Windshield Auto Glass Repair Kits - Parts & Supplies
Glass-Star America supplies for fixing cracked windshields and replenishing your auto glass repair kits. These great parts are all you need for stopping windshield cracks and pits.
The SVR 24 MAX-Vac supply pack is ideal for use with any Clear Star repair system that uses Max-Vac injector assembly. This convenient re-supply pack comes equipped with all the materials you need to complete 24 repairs, including replacement parts. Are-supply pack that does 48 repairs is also available in model #SVR 48.
All components that are contained in re-supply packs can also be purchased separately and are listed below.
Long Crack Repair
The Clear Star crack repair method teaches you to repair small stress cracks that emulate from the windshield edge and small cracks that extend from typical stone chip type breaks.
Cracks can start out small, but often spread quickly across the entire windshield. The focus is on stopping small cracks before they spread beyond repair. The end of the crack is the tightest area and consequently the most difficult area to repair.
Repairing small cracks requires a pilot hole 1/8 inch beyond the end of the crack and then creating a miniature bulls eye at the drilled pilot hole to relieve the stress. Once the stress is relieved, the bulls eye is repaired by performing a typical windshield repair and applying the crack resin along the crack and then curing.
The Clear Star pack includes the tools and instructions to perform small crack repair, providing an insight to the crack repair process and the results obtainable.
UV Shop Lamps
SVR 24 Super Vac re-supply pack (24 repairs)
SVR 48 Super Vac re-supply pack (48 repairs)
L240 UV Lamp 110 volts
L240F UV Lamp 220 volts
UV Quick Cure Resin
UV Curing Lamp
CH1 1 oz. with Dispenser
CH½ ½ oz. with Dispenser
B80 UV Battery Lamp e/w Lamp Clip
UV Crack Filler Resin
UV 12v Adaptor
CCH1 1oz. with Dispenser
CCH½ ½oz. with Dispenser
CL12V Cigarette Lighter Adaptor for B80 UV Curing Lamp.
UV Pit Filler Resin
PFCH1 1oz. with Dispenser
PFCH½ ½oz. with Dispenser
GD18 12 Volt Drill with Cigarette Lighter Adaptor & 9' Extension Cord.
TR6 25 Adhesive Alignment Seals
(Double Sided Adhesive Seals)
D5 5 Carbide Drill Bits
(1/16 shaft/ hole size .035).
(25 Pedestal Resin Chambers)
MY Pad of 25 Mylar Curing Squares (½" x ½")
UV Curing Bulb
IBV Super Vac Injector Assembly
RB1 Replacement for B80 and L240 Lamps
(4 watt, 6 inches long, Can be used with all UV lamps).
H1 30" Length Hose
PP17 1oz. Bottle
PP8 ½oz. Bottle
FR1 Flow Regulator
(Controls resin flow in break cavity and prevents resin from entering hose)